13.0 sec Hemi Ram, all stock Internals.

SrtBrad said:
I have made over 300 runs at the track with stock wheels and tires and about 10 runs with my new 17" Nitto Drag Radials(305/40/17). You can see from my list of mods that I'm pretty close to stock. Here are my best results with both setups at the same track and same day:

17" Drag Radials best time: 13.392@103mph
22" Factory Rims 13.568@104mph
Click to expand...


:congrats:
And your not a RC, you’re a very slow QC as many have scene 12s with a few bolt ons pushing 22s.

So you used 17s on all 4 hubs? And I guess you swapped over to smaller breaks like the Normal Half ton Ram? (Like I mentioned) Come on, you can do better than that.. Did you have the gas pedal down all the way? Try again.

NEXT:ciao:
 
Last edited:
nycstev said:
Could have had a 100 mph tailwind? Maybe track was on a slight declination? or both?:D
Click to expand...


Actually there was a cross wind, Thanks
 
Last edited:
oldguysrt10 said:
I gotta believe there's more on the truck than bolt-ons w/stock internals too.

Houston Raceway Park is near sea level, and the best air I ever caught there was on a night with my Hemi QC. I ran a 14.036 and it had Superchips, APS Stall, headers, hi-flow cats, Corsa cat-back, motoblue underdrive, AEM CAI, the stock belt driven fan removed/replaced with an e-fan, M&H drag radials, and tailgate, back seat, and spare tire removed, and a dry cell battery for reduced weight too. I know there are a few hundred pounds difference between the QC and SC but with each hundred pounds representing at best 0.1 seconds in the quarter, it's stretch for me to believe the 1 second differential from my best didn't have some sort of forced induction....stranger things have happend though.

oldguy
Click to expand...

Correct,. Stranger things have happened. And this is 100% Legit, E-mail him, he has gotten his share of flack. But only jealous bitches will deny it after talking to him.


*Hemifever's 4x4 ran 11.5 With that STS Turbo + built Forged 5.7 using 6.1 cam...
I think thats nutts...
Mods
KRC 6005 heads / KRC 4340 rods
Ferrea 1.60/2.05 11/32 SuperFlo valves / Comp titanium retainers / Manley Springs / Spring Cups
B&G flashed pcm / ATI Super Damper / Manley pushrods / 6.1L Cam
Coated Ross pistons .927 pins / 6.1L crank / JBA headers
ARP main/head studs / Clevite main/rod/cam bearings
SMT6 / SRT-4 50# injectors / Accel 2 bar map sensor
STS Methanol injection / Tial BOV / Tial Wastegate / STS EBC / FMIC
Amsoil dual filter oil system / Magnaflow hiflo cat / Moroso spark plug index washers

Fever might have had spray on the 11.5... but this kid in the red Ram is All motor! No Bull shit kids, sorry. I dont see why its that crazy.(its all about wheel to gear ratio, and power to weight ratio) ie MATH!

If you notice, his reaction time is perfect.


Hemi 777 ran 13.7 in a 2 Door Daytona Ram Pushing factory 20s&33" tires with Super Chips and his Special Intake (Obviously prepped)
 
Last edited:
MG42pillbox said:
Im sorry your so jealous, E-mail him if you want or stop hating, it wont change the fact.
Click to expand...


I dont think anyone here is jealous or hating....I am very familiar with building the 5.7 & 6.1 hemis...a stock or even with bolted on mods aint going to push a 2.5 ton truck thru the 1320 in 13 seconds...something wrong here..
 
MG42pillbox said:
Im sorry your so jealous, E-mail him if you want or stop hating, it wont change the fact.
Click to expand...

Jealousy and hatred? I dont't think so.. at least not a truck forum! My point is that the money he spent didn't justify the outcome.
Thanks
Steve
 
Last edited:
TNVIPER said:
I dont think anyone here is jealous or hating....I am very familiar with building the 5.7 & 6.1 hemis...a stock or even with bolted on mods aint going to push a 2.5 ton truck thru the 1320 in 13 seconds...something wrong here..
Click to expand...



A agree, this truck is not 5,000lbs. Again, hes Legit. I would have been more than happy to point it out if he wasnt.

Smaller breaks, smaller wheels, small ass Tires. Lighter frame... These Hemi Rams have alot of straight-line advantages over the Viper trucks, and they do add up.
 
nycstev said:
Jealousy and hatred? I dont't think so.. at least not a truck forum! My point is that the money he spent didn't justify the outcome.
Thanks
Steve
Click to expand...


Maybe you mean, "explain" the outcome. Because he definitely feels justified :D
 
MG42pillbox said:
:congrats:
And your not a RC, you’re a very slow QC as many have scene 12s with a few bolt ons pushing 22s.

So you used 17s on all 4 hubs? And I guess you swapped over to smaller breaks like the Normal Half ton Ram? (Like I mentioned) Come on, you can do better than that.. Did you have the gas pedal down all the way? Try again.

NEXT:ciao:
Click to expand...

I'm a super slow QC :eek: Call me what you want but I call:bs:
 
MG42pillbox said:
Yea just ignore my questions, better to stay quite then to remove all doubt :D
Click to expand...

All brakes stock, front 2 wheels and tires stock, rear 2 wheels 17" nitto DR's on stock rear breaks, gas pedal all the way down, .005 reaction time, very little spin off the line, 13.3 1/4 mile time @ 103 mph, list of mods in signature. Any other info you need?

As far as the 13 sec hemi what "exactly" are the mods he was running for the 13 sec run? What kind of wheels and tires? What is the weight of the truck? Was he running NOS or race gas? Is the engine completely stock internally?
 
Last edited:
MG42pillbox said:
Maybe you mean, "explain" the outcome. Because he definitely feels justified :D
Click to expand...


No Mr Pillbox. I know exactly what I mean .Maybe you don't know what YOU mean . You know what I mean Jelly bean?;) :p
 
SrtBrad said:
All brakes stock, front 2 wheels and tires stock, rear 2 wheels 17" nitto DR's on stock rear breaks, gas pedal all the way down, .005 reaction time, very little spin off the line, 13.3 1/4 mile time @ 103 mph, list of mods in signature. Any other info you need?

As far as the 13 sec hemi what "exactly" are the mods he was running for the 13 sec run? What kind of wheels and tires? Is there video or pics of your story? What is the weight of the truck? Was he running NOS or race gas? Is the engine completely stock internally?
Click to expand...


Yes he reduced the weight, I dont know what exactly. The Engine is all stock inside. He has the small ass factory 17s with 25" slicks as you can see. No Spray, no PSI.

Did you look at the damn link I posted man? Today 01:44 PM :nurse:
 
nycstev said:
No Mr Pillbox. I know exactly what I mean .Maybe you don't know what YOU mean . You know what I mean Jelly bean?;) :p
Click to expand...




jelly_beans_250x251.jpg


:fight: :pcguru:
 
You must log in or register to reply here.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Random Media

waxed srt 015
photo
image
Dave small
Back
Top