Fstjacks "DOM" inator is alive

TheSickness said:
That still don't get me there or shall I start Hitchin now :p
Click to expand...


Dang it Mikey, had you flown to Houston I would buckle you up safely in #1900 and we'd hit the faaaaah-riggen road.. Then you could just stay in my room in Perry. How much for a flight to Houston anyway?


But to stay on the subject, :confused: I thought the monster Jack was building is silver..
 
JMB Justin said:
I dont know exact #'s, it made about 650whp without a real tune on 3.5psi. No sense in spraying it or going further because no on was going to be happy with that.
Justin
Click to expand...

That's very interesting.

If any of you recall, my dyno experience was just about identical. I peaked around 648-650 RWHP at around 4psi. We suspected belt slippage at the time rather than running out of compressor, but now I'm seriously wondering if I'm not hitting the same wall. Thing is, the boost stayed right around 4psi from about 3500-4000rpm on up, so it really had us thinking that it was the belt.

I'd sure like to know what you have in mind for an alternate on a compressor though. Novi doesn't make them much bigger. Their 2200 series compressor only rates 45 CFM above the 2000 that we have already.:dontknow:

Mind you, it wouldn't break my heart to have to switch to a TT system.;)



.
 
Ram From Hell said:
That's very interesting.

If any of you recall, my dyno experience was just about identical. I peaked around 648-650 RWHP at around 4psi. We suspected belt slippage at the time rather than running out of compressor, but now I'm seriously wondering if I'm not hitting the same wall. Thing is, the boost stayed right around 4psi from about 3500-4000rpm on up, so it really had us thinking that it was the belt.

I'd sure like to know what you have in mind for an alternate on a compressor though. Novi doesn't make them much bigger. Their 2200 series compressor only rates 45 CFM above the 2000 that we have already.:dontknow:

Mind you, it wouldn't break my heart to have to switch to a TT system.;)



.
Click to expand...

Eric Call me 314-540-1541, amazing similar results and I guarantee we didnt have belt slip.
Justin
 
Stinker said:
one of these days you yungons will listen to this ol dumb country redneck:p
Click to expand...

Dual turbo's by chance????? :) How's the engine coming or little hard to work on when you are driving across country????

Wil
 
Procharger is the best answer if you want to stay with a centrifugal. If you were only seeing 4psi then your engine moves around 1000cfm at redline (without boost)! That has to be one hell of a build (big bore and great flowing heads)! Would love to see the buildsheet on that one!
 
Stinker said:
one of these days you yungons will listen to this ol dumb country redneck:p
Click to expand...

You talking to me!?!? I already know how to make more power than your turd with one turbo, pretty soon it will be more power than you with one supercharger :D
Justin
 
pokeytemplar said:
Procharger is the best answer if you want to stay with a centrifugal. If you were only seeing 4psi then your engine moves around 1000cfm at redline (without boost)! That has to be one hell of a build (big bore and great flowing heads)! Would love to see the buildsheet on that one!
Click to expand...

Here ya go:;)

Engine:

New ’05 big bolt crankshaft, nitrided
Pro-Gram billet main caps
Oliver forged connecting rods
Diamond forged pistons, 9:1 compression ratio
ARP rod bolts
Modified oil pump
Main and rod bearings are coated with friction-reducing material
Piston skirts are coated with the same, and ceramic coated on top
MoPar comp coupe cam, aftermarket push rods and lifters
JM Cylinder Heads Striker heads with inconel valves and Jesel valve train
ARP head studs
Cometic head gaskets
Hogan’s Racing custom sheetmetal intake and fuel rails, powder coated
85# flow-matched fuel injectors
BBK throttle body
Billet aluminum tall valve covers, powder coated
Belanger long-tube headers, high-flow cats, Borla cat-back
AEM engine management system, modified and tuned by John Reed
Walbro fuel pumps (x3), in tank assembly by PBJ Performance
Magnafuel boost-referenced fuel pressure regulator with fuel return line
FJO Racing 2-stage water/methanol injection system
BTR Viper 2-stage nitrous/propane/gas injection system (500hp shot max)
NOS Launcher progressive nitrous touch-screen control system, w/ O2 safeguard
JMB powder coated rad pipes


Paxton Supercharger:

Custom water reservoir, with Meizere water pump and temp sensor, powder coated
Custom water cooler, polished
Custom intercooler water chiller (A/C system cooled)
Custom air intake system by DC Performance, powder coated
Custom overdrive crank pulley
Goodyear 113â€￾ serpentine belt
Powder coated supercharger mounting brackets
Turbonetics T-bolt clamps, polished
 
Ram From Hell,

Are you running stock bore and rod length as well? The intake manifold, Strikers, headers and cam must be matched perfectly! You wound need at least a Procharger F-2 to feed your truck with 14+psi! The F1-R would be on the small side for your build.......
 
pokeytemplar said:
Ram From Hell,

Are you running stock bore and rod length as well? The intake manifold, Strikers, headers and cam must be matched perfectly! You wound need at least a Procharger F-2 to feed your truck with 14+psi! The F1-R would be on the small side for your build.......
Click to expand...

It's just a shade over stock displacement.

The intake was built specifically for my truck's build. Heads, cam, etc., were all factored in to it's construction.

The F2 ought to make about as much boost as the engine can tolerate.;)
 
JMB Justin said:
You talking to me!?!? I already know how to make more power than your turd with one turbo, pretty soon it will be more power than you with one supercharger :D
Justin
Click to expand...
Heck no wasnt talking to you:p BUT! you should have known a paxton wasnt going to feed those big ol heads , the overlapping cam and huge intake;)

but as far as turbos................we shall see:p

But honestly I am done in the hp war, I jsut want to drive mine, enjoy it, play with it, and drive it some more......hmmmmmmmm .....sounds kinda like the ol lady:D
 
Ram From Hell said:
Here ya go:;)

Engine:

New ’05 big bolt crankshaft, nitrided
Pro-Gram billet main caps
Oliver forged connecting rods
Diamond forged pistons, 9:1 compression ratio
ARP rod bolts
Modified oil pump
Main and rod bearings are coated with friction-reducing material
Piston skirts are coated with the same, and ceramic coated on top
MoPar comp coupe cam, aftermarket push rods and lifters
JM Cylinder Heads Striker heads with inconel valves and Jesel valve train
ARP head studs
Cometic head gaskets
Hogan’s Racing custom sheetmetal intake and fuel rails, powder coated
85# flow-matched fuel injectors
BBK throttle body
Billet aluminum tall valve covers, powder coated
Belanger long-tube headers, high-flow cats, Borla cat-back
AEM engine management system, modified and tuned by John Reed
Walbro fuel pumps (x3), in tank assembly by PBJ Performance
Magnafuel boost-referenced fuel pressure regulator with fuel return line
FJO Racing 2-stage water/methanol injection system
BTR Viper 2-stage nitrous/propane/gas injection system (500hp shot max)
NOS Launcher progressive nitrous touch-screen control system, w/ O2 safeguard
JMB powder coated rad pipes


Paxton Supercharger:

Custom water reservoir, with Meizere water pump and temp sensor, powder coated
Custom water cooler, polished
Custom intercooler water chiller (A/C system cooled)
Custom air intake system by DC Performance, powder coated
Custom overdrive crank pulley
Goodyear 113â€￾ serpentine belt
Powder coated supercharger mounting brackets
Turbonetics T-bolt clamps, polished
Click to expand...
what ? no chrome muffler bearings ?? :D
 
Stinker said:
Heck no wasnt talking to you:p BUT! you should have known a paxton wasnt going to feed those big ol heads , the overlapping cam and huge intake;)

but as far as turbos................we shall see:p

But honestly I am done in the hp war, I jsut want to drive mine, enjoy it, play with it, and drive it some more......hmmmmmmmm .....sounds kinda like the ol lady:D
Click to expand...

You know im just giving you trouble Stinky, I <3 you. Im anxiously awaiting a PM (or call) from you BTW.

I didnt spec the paxton for the build, I installed it and made a custom tensoner setup, air intake, intercooler and pipes for it. I made the best of what was there and everyone thought it had at least 8 psi or so in it, but we were all wrong on that, live and learn. I have been given the green light to do what I want to do to fix the issue (the novi 2000) and feel confident it will make SICK power when its done. Eric is on board as well and this may very well turn into a very bad ass DIY supercharger kit for those that arent happy with the limits of the paxton/roe and dont want to bring their truck to Missouri for my monster turbo kit. Im very excited about it and will be moving as quick as possible to get some results and make Jack a very proud papa!
Justin
 
Stinker said:
But honestly I am done in the hp war, I jsut want to drive mine, enjoy it, play with it, and drive it some more......hmmmmmmmm .....sounds kinda like the ol lady:D
Click to expand...


That makes two of us...more to come!
 
JMB Justin said:
You know im just giving you trouble Stinky, I <3 you. Im anxiously awaiting a PM (or call) from you BTW.

I didnt spec the paxton for the build, I installed it and made a custom tensoner setup, air intake, intercooler and pipes for it. I made the best of what was there and everyone thought it had at least 8 psi or so in it, but we were all wrong on that, live and learn. I have been given the green light to do what I want to do to fix the issue (the novi 2000) and feel confident it will make SICK power when its done. Eric is on board as well and this may very well turn into a very bad ass DIY supercharger kit for those that arent happy with the limits of the paxton/roe and dont want to bring their truck to Missouri for my monster turbo kit. Im very excited about it and will be moving as quick as possible to get some results and make Jack a very proud papa!
Justin
Click to expand...

I just like busting you sac bud:p :p :p :p :p :p :p :p :p LOLOLL Jack shoulda known better!LOLOLL
 
Stinker said:
I just like busting you sac bud:p :p :p :p :p :p :p :p :p LOLOLL Jack shoulda known better!LOLOLL
Click to expand...

I wasnt expecting that either or I would have told Jack upfront, I really thought 8psi was attainable with the bigger lower pulley, but it didnt work out that way. He will be soooo much happier with the new setup, it will be so far beyond a paxton in every way, I cant wait!
Justin
 
You must log in or register to reply here.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Random Media

image
20140811 141904
Throttle body
1703.jpg
Back
Top