NEW MULTI GUAGE

i have one of those already! used it in my hemi....there pretty cool, plugs right into your OBII port.......
 
What are the parameters now Tony I remembered they were only 14 originally some one posted up about them a while back i think it was labeled badass guages
 
RPM
MPH
Intake Air Temperature (post Intercooler)
Ambient Air Temperature (pre Intercooler)
Engine Coolant Temperature
Exhaust Gas Temperature (PCM Calculated)
Transmission Temp. (auto trans)
Manifold Pressure (vacuum/boost) displayed in PSI
Fuel Temperature
 
Battery Voltage
Battery Temp
Injector Pulse Width in msec.
Injector Duty Cycle (%)
Air Flow Rate into engine
Long Term Fuel Trim
Short Term Fuel Trim
O2 Sensor Voltage
Barometric Pressure
Ignition Advance
Base Spark
PCM Spark Adjust
Fuel Status (open/closed loop)
Wastegate Solenoid Duty Cycle (%)
Knock Retard
Knock Sensor Raw Voltage
Throttle Position Percentage
Throttle Position Sensor Raw Volts
Calculated Net Horsepower
Engine Load
 
Transmission Slip
Current Transmission Gear
Torque Delivered to Transmission
Torque Converter lockup status
Brake pressure
Brake Booster Travel
Steering Angle
Non-driven Wheel Speed
Lateral G's
Yaw
Fuel economy (instantaneous and average)
P-ratio - pressure ratio MAP/Barometer
2 user configurable analog inputs
 
0-5v inputs can be configured to read the outputs from MAP sensors, Air/Fuel ratio kits, pressure or temperature sensors, etc. Raw voltage can be displayed or a conversion can be entered to read proper units.

Users will find that ability to log RPM vs other parameters at high speed such as ignition advance, boost, or knock retard invaluable with regards to tuning.
 
there retailing at $249 i am back and forth withthem on price now, I hope to have it all taken care of by monday, and order up a few:)

custom_chrysler.jpg
 
I have two, awesome tool to have , everyone should buy these
10129_1156757353212_1056073478_30386571_712076_n.jpg
 
RB04 said:
I have two, awesome tool to have , everyone should buy these
10129_1156757353212_1056073478_30386571_712076_n.jpg
:rock: :rock: :rock: :rock:

Shoot me a pm if you would , let me know how well they work and if ya like them, they look like a killer tuning tool and easy to keep track of certain mods buddy

thanks!
 
Jfireboy1 said:
Tony as u know..... I'm waiting! :D
yessir, your first on the list:rock: I hope to have it all tied up by monday with them and get a few on order buddy, will def let you know the minute I get confirmation
LOLOL as you see I texted you the minute they replied at midnite last night lOLOLOL:aetsch:
 
JTS VENOM PERFORMANCE said:
yessir, your first on the list:rock: I hope to have it all tied up by monday with them and get a few on order buddy, will def let you know the minute I get confirmation
LOLOL as you see I texted you the minute they replied at midnite last night lOLOLOL:aetsch:
10-4!!! One of the best things if I'm not mistaking is that it can record upto one minute of info , so say if you run a 1/8 or 1/4 and wanna know what everything is doing it will data log what your reading were during your run for upto one minute!!! :rock: . Man ! Come to think of it Tony I don't know if one minute is long enough for Santeen to run the 1/4!!!! Lol! Might have to check if they make one that will do atleast 1 1/2 minutes! Lmao!!!! :D ! What's up Steve if u r watching!?!?! Lol
 

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top