What Did You Do to your Vehicle Today?

Did the JTS venom sticker mod! Changed the oil and installed the stinker oil cooler lines, packed the factory speaker box with polyester fiber, pulled fog light cleaned it fixed the small crack at the top of the case . No more mosquito nest in my fog light !!! Speaker box does sound better. It will do till I can upgrade the system .

Also smoked a 03 04 convertible cobra on the interstate. To be honest i know the dudes clutch was shot. Car sounded very healthy but I could smell the clutch when I was behind him. I guess he thought roasting the clutch would make it work better. I will be surprised if he makes it home tonight on the clutch .

Next week going to try and get the viper hydraulics installed and the new spec clutch. Can't wait but the break in is going to be hell.

Brandon
 
Installed the Volant intake that Wes (walbert) gave me.:rock: And, I don't care what the dyno says, there is definitely an improvement with the Volant intake, over a drop in K&N. Very notiveable in the second gear shift. Before it would just chirp second gear. Now it almost breaks the tires loose.:D :burnout:
 
mysrt10 said:
lets see some pics of the stainlees bolts on your rear end;) and the skid pad
Click to expand...


Here is a pic of "Stinkers Rear End (DTS, Detroit Locker) with stainless...helps a huge amount...probably worth two or three tenths! :p

IMG_0002-7.jpg


Will need sunlight to get some pics of the skid pad...later today...
 
SANTEEN said:
Installed the Volant intake that Wes (walbert) gave me.:rock: And, I don't care what the dyno says, there is definitely an improvement with the Volant intake, over a drop in K&N. Very notiveable in the second gear shift. Before it would just chirp second gear. Now it almost breaks the tires loose.:D :burnout:
Click to expand...


Notivable?:confused:
 
Prof said:
Here is a pic of "Stinkers Rear End (DTS, Detroit Locker) with stainless...helps a huge amount...probably worth two or three tenths! :p

IMG_0002-7.jpg


Will need sunlight to get some pics of the skid pad...later today...
Click to expand...

So.. It looks like Stinker's rear end doesn't need that huge shock/stabilizer thingy.. Looks real good to me. I need to get with him since I have a complete 4.56 gear setup lying around. A Stinky rear end may do me some "NOTICABLE" good.:D
 
Venom Power said:
Notivable?:confused:
Click to expand...
Why am I not surprised that you caught that.;) Funny how the wife didn't mind this mod, since it didn't involve the AMEX.:D
 
SANTEEN said:
Why am I not surprised that you caught that.;) Funny how the wife didn't mind this mod, since it didn't involve the AMEX.:D
Click to expand...

:congrats: See? Keep all mods off the AMEX and all will be good. Now charges for a spelling dictionary? That's another story.:laugh:
 
Planning to finish cleaning/waxing mine this week for a couple shows this weekend.
 
Venom Power said:
So.. It looks like Stinker's rear end doesn't need that huge shock/stabilizer thingy.. Looks real good to me. I need to get with him since I have a complete 4.56 gear setup lying around. A Stinky rear end may do me some "NOTICABLE" good.:D
Click to expand...


The Stinker Rear End is the second best mod on my vehicle. The Roe SC made the most difference, the DTS Detroit Locker is what gets the hp to the asphalt, keeps the truck going straight when I hit a gear too hard, and assures me of no rear end explosions...while saving about a hundred pounds.

If you want a serious performer, I think you must go with this mod!
 
Prof said:
The Stinker Rear End is the second best mod on my vehicle. The Roe SC made the most difference, the DTS Detroit Locker is what gets the hp to the asphalt, keeps the truck going straight when I hit a gear too hard, and assures me of no rear end explosions...while saving about a hundred pounds.

If you want a serious performer, I think you must go with this mod!
Click to expand...


Advice duly noted.
 
Tinted my taillights with reverse light cut out to match my led 3rd brake light! JMB Fang emblems to come!!
 
Installed my JMB CAI and catch can I got off another member. Of course I got it together, started her up and was like...... :confused: Whats that noise....


Oh yea, need to plug the hose coming off the bottom of the TB.....

Got really good at putting it on the second time.
 
Gave my truck a sponge bath and waxed about 1/3rd of it.
 
Most recent mod was installing slotted rotors and Posi quiet brake pads from Zeckhausen. They work great, no squeal, wheels stay clean and have plenty of stopping power. :rock:
 
PhatPharmacist said:
Most recent mod was installing slotted rotors and Posi quiet brake pads from Zeckhausen. They work great, no squeal, wheels stay clean and have plenty of stopping power. :rock:
Click to expand...
That was my choice last year, Love em.
 
Did nothing to mine today. My Mother got ill today so I may miss the show Saturday.
 
Just drove the truck yesterday...

Today, starting to strip all the wax off, (Dawn treatment) and then clay bar it, and start the Zaino process, should get three coats on it by next Sunday for the Cantigny Car Show.

For those of you in the Chicago area...this is the top show of the year. Limited to 400 vehicles, on the Old McCormick Estate in Wheaton, IL.
 
You must log in or register to reply here.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Random Media

P1010573
Dave 3 032011
DSC01146
P9020001
Back
Top