What Did You Do to your Vehicle Today?

[ViperTruck2933]

Thanks guys. This car is the ONLY reason I would have ever sold my truck.

My heart still skips a beat every time I fire it up.

:rock: :rock: :rock:

 

[floridaboy]

finished the install of killer chiller on my truck. it use to run 20-30 degrees over ambient. Now it runs a few degrees below ambient.
Very happy. Hopefully I will get it dynoed {if I can stay off the golf coarse} to see if any change. it may just make it more consistant.

 

[SANTEEN]

finished the install of killer chiller on my truck. it use to run 20-30 degrees over ambient. Now it runs a few degrees below ambient.
Very happy. Hopefully I will get it dynoed {if I can stay off the golf coarse} to see if any change. it may just make it more consistant.

Been interested in this. Any details, links, pics?

 

[kickinassrt-10]

Gave it a fresh Mobil 1 oil change! Also cleaned and took new pics!

 

[SANTEEN]

Gave it a fresh Mobil 1 oil change! Also cleaned and took new pics!

Looks good roger. Get the tranny fixed yet?

 

[kickinassrt-10]

Looks good roger. Get the tranny fixed yet?

Thanks man! Yea it was fixed but it needs to go back again.

 

[floridaboy]

I'll try and get pics up tomorrow.

 

[Prof]

Went for five drives! Just could not stop...weather was perfect...lots of street rods tooling around...it was one of those days that I just could not stay out of the truck...window down, lots of time under 2500 rpm, just letting the world look at what has to be one of the most wonderful pleasure vehicles ever designed!

Thumbs up everywhere...admiring glances...and only one challenge, from a very nicely appointed Evo that sounded wonderfully deep throated.

Someone else jumped to the challenge and I just watched from sideline, that is my approach these days...tempted but still successfully exercising restraint.

These two reminders in my truck help me keep my focus:

 

[Wifey]

Went for five drives! Just could not stop...weather was perfect...lots of street rods tooling around...it was one of those days that I just could not stay out of the truck...window down, lots of time under 2500 rpm, just letting the world look at what has to be one of the most wonderful pleasure vehicles ever designed!

Thumbs up everywhere...admiring glances...and only one challenge, from a very nicely appointed Evo that sounded wonderfully deep throated.

Someone else jumped to the challenge and I just watched from sideline, that is my approach these days...tempted but still successfully exercising restraint.

These two reminders in my truck help me keep my focus:

SEE WHAT HAPPENS WHEN old people get cadillacs

 

[Prof]

Want to go for a ride little girl? hehehe

 

[Wifey]

Want to go for a ride little girl? hehehe

:rock: :rock: :rock: YES, in the slow, black truck

 

[Prof]

I know you...you are just saying that you will go for a ride with me to save the miles on your truck!

 

[mickster]

Oil and filter change and fixed that annoying exhaust blow at the manifold to downpipe join.:burnout:

 

[JimTeTe]

Installed new B&M Shifter with Cherry Performance Stick. SRT-10 one side VTCOA the other.

I should have done this mod 3 years ago, what a difference this shifter makes, B&M convinced me.

Jim

 

[Da1Chief]

Had a Photo Shoot with the truck on Sunday... Here are a few of the Pics

 

[VIPER]

awwwwwww-someeeeeeeeeee pal, truck looks GREAT

 

[VIPER]

Installed new B&M Shifter with Cherry Performance Stick. SRT-10 one side VTCOA the other.

I should have done this mod 3 years ago, what a difference this shifter makes, B&M convinced me.

Jim

how are you keepin the shifter boot from riding up the shaft ?

( for tho with dirty minds ..... dont even :aetsch: )

 

[JimTeTe]

how are you keepin the shifter boot from riding up the shaft ?

( for tho with dirty minds ..... dont even :aetsch: )

I'm not, lowered it a bit for the pics,

I'm going to stick a piece of 3/8" neoprene gasket between the stick and the mount on the shifter. Get a small bit of tranny noise through the shifter. But the way it shifts is worth the bit of noise I might hear over the exhaust, which is none with the window open. ... lol

CHIEF - Truck is lookin Sweet Bud ....

Jim

 

[eddie102870]

these came in today for the challenger, 9 inch wheels for the front, 10 inch wheels for the back. :rock: and Dom, stinker didnt copy these from Justin.

 

[Prof]

these came in today for the challenger, 9 inch wheels for the front, 10 inch wheels for the back. :rock:

Sweet Eddie! Awaiting pics of them mounted.