gitterdone bone!!!!!!!!!!:rock:
Bone's Engine Pull - Part Deux
- Thread starter Bone
- Start date
Bone said:
Let the beer flow!
and the fun begin!!!!!
Hey Bone, I'd like to see what numbers you will be putting down since I will be doing a similar build. I will probably be pulling my motor in Feb.
I have 7-8 complete stock rods with Diamond pistons on them if anyone needs a replacement. Last time I cleaned up the stock pistons and gave them out as ashtrays. I would do it again, but it is a major pain to pull them apart and they probably could be used by someone who jsut needs one or two replacements to their stock engine. As soon as I put together my new setup, I will hand them out if needed.
Also, I have the Roe 48 lb fuel injectors with only about 1500 miles on them that came with the SC kit. Could be a good upgrade for those who have lightly modded or went NOS....best offer.
Also, I have the Roe 48 lb fuel injectors with only about 1500 miles on them that came with the SC kit. Could be a good upgrade for those who have lightly modded or went NOS....best offer.
FATJACK
Full Access Member
Hey Bone, is that your Chevelle in the Flowmaster commercial?
The tag on the front says BONE!
You gonna be at the Southeast GTG in April? I need to hear those horns again.
Jack (the fat one)
The tag on the front says BONE!
You gonna be at the Southeast GTG in April? I need to hear those horns again.
Jack (the fat one)
mopower1958
Full Access Member
- Joined
- May 20, 2006
- Messages
- 2,482
- Reaction score
- 0
You gonna have it ready for the Nats this year?
FATJACK
Full Access Member
Bone said:That could be Bone's vehicle!
I can probably make the GTG, I don't know about the SRT. It will be close.
You can always come with or without your truck, by the way WTF kind of answer was that????:burnout: :burnout:
KRAZYSRT10
Full Access Member
- Joined
- Sep 2, 2006
- Messages
- 9,647
- Reaction score
- 0
This is the second longest build in the history of this Website...1st place going to Jack!
Get on with it Boner! Sheesh!
Get on with it Boner! Sheesh!
sleeper
Full Access Member
No, you forgot about RAMFROMHELL.KRAZYSRT10 said:This is the second longest build in the history of this Website...1st place going to Jack!
Get on with it Boner! Sheesh!
Mine makes it to the Nats every year! :rock: I just let it air out in between events...KRAZYSRT10 said:This is the second longest build in the history of this Website...1st place going to Jack!
Get on with it Boner! Sheesh!
You should see the towing bill!!!
- Joined
- May 4, 2007
- Messages
- 255
- Reaction score
- 22
If you guys are trying to find another source for belts try Gates. I found they have quite a selection and don't forget their Industrial line. It's all available on their website including tech data and materials.
Gates is what I'm using.
My apologies Bone. The belt I'm using is a Dayco part#7PK2325. My Pulley is a 1/4 inch smaller than the standard size. Here are their 7 rib sizes.
Part Number Metric Part. Effective Length Top Width No. of Ribs
5070425 7PK1080 42.5 0.96 7
5070445 7PK1132 44.5 0.96 7
5070505 7PK1285 50.6 0.96 7
5070553 7PK1405 55.3 0.96 7
5070615 7PK1560 61.5 0.96 7
5070625 7PK1590 62.6 0.96 7
5070630 7PK1600 63 0.96 7
5070640 7PK1625 64 0.96 7
5070653 7PK1660 65.4 0.96 7
5070675 7PK1715 67.5 0.96 7
5070680 7PK1725 68 0.96 7
5070683 7PK1735 68.3 0.96 7
5070685 7PK1740 68.5 0.96 7
5070690 7PK1755 69 0.96 7
5070695 7PK1765 69.5 0.96 7
5070700 7PK1780 70.1 0.96 7
5070705 7PK1790 70.5 0.96 7
5070735 7PK1865 73.5 0.96 7
5070750 7PK1905 75 0.96 7
5070760 7PK1930 76.1 0.96 7
5070763 7PK1935 76.3 0.96 7
5070788 7PK2000 78.8 0.96 7
5070825 7PK2095 82.5 0.96 7
5070835 7PK2120 83.5 0.96 7
5070840 7PK2135 84 0.96 7
5070855 7PK2170 85.5 0.96 7
5070874 7PK2220 87.4 0.96 7
5070885 7PK2250 88.6 0.96 7
5070890 7PK2260 89 0.96 7
5070895 7PK2275 89.6 0.96 7
5070900 7PK2285 90 0.96 7
5070905 7PK2300 90.6 0.96 7
5070915 7PK2325 91.5 0.96 7
5070923 7PK2345 92.3 0.96 7
5070950 7PK2415 95.1 0.96 7
5070955 7PK2426 95.5 0.96 7
5070973 7PK2470 97.3 0.96 7
5070975 7PK2475 97.5 0.96 7
5071000 7PK2540 100 0.96 7
5071005 7PK2555 101 0.96 7
5071008 7PK2560 101 0.96 7
5071013 7PK2570 101 0.96 7
5071040 7PK2645 104 0.96 7
5071045 7PK2655 105 0.96 7
5071133 7PK2875 113 0.96 7
5071140 7PK2895 114 0.96 7
5071195 7PK3035 120 0.96 7
5071248 7PK3170 125 0.96 7
Part Number Metric Part. Effective Length Top Width No. of Ribs
5070425 7PK1080 42.5 0.96 7
5070445 7PK1132 44.5 0.96 7
5070505 7PK1285 50.6 0.96 7
5070553 7PK1405 55.3 0.96 7
5070615 7PK1560 61.5 0.96 7
5070625 7PK1590 62.6 0.96 7
5070630 7PK1600 63 0.96 7
5070640 7PK1625 64 0.96 7
5070653 7PK1660 65.4 0.96 7
5070675 7PK1715 67.5 0.96 7
5070680 7PK1725 68 0.96 7
5070683 7PK1735 68.3 0.96 7
5070685 7PK1740 68.5 0.96 7
5070690 7PK1755 69 0.96 7
5070695 7PK1765 69.5 0.96 7
5070700 7PK1780 70.1 0.96 7
5070705 7PK1790 70.5 0.96 7
5070735 7PK1865 73.5 0.96 7
5070750 7PK1905 75 0.96 7
5070760 7PK1930 76.1 0.96 7
5070763 7PK1935 76.3 0.96 7
5070788 7PK2000 78.8 0.96 7
5070825 7PK2095 82.5 0.96 7
5070835 7PK2120 83.5 0.96 7
5070840 7PK2135 84 0.96 7
5070855 7PK2170 85.5 0.96 7
5070874 7PK2220 87.4 0.96 7
5070885 7PK2250 88.6 0.96 7
5070890 7PK2260 89 0.96 7
5070895 7PK2275 89.6 0.96 7
5070900 7PK2285 90 0.96 7
5070905 7PK2300 90.6 0.96 7
5070915 7PK2325 91.5 0.96 7
5070923 7PK2345 92.3 0.96 7
5070950 7PK2415 95.1 0.96 7
5070955 7PK2426 95.5 0.96 7
5070973 7PK2470 97.3 0.96 7
5070975 7PK2475 97.5 0.96 7
5071000 7PK2540 100 0.96 7
5071005 7PK2555 101 0.96 7
5071008 7PK2560 101 0.96 7
5071013 7PK2570 101 0.96 7
5071040 7PK2645 104 0.96 7
5071045 7PK2655 105 0.96 7
5071133 7PK2875 113 0.96 7
5071140 7PK2895 114 0.96 7
5071195 7PK3035 120 0.96 7
5071248 7PK3170 125 0.96 7
Support Us
Become A Supporting Member Today!
