Frosty05
Full Access Member
Still at it today, it's just too nice not to be in the garage.
So far i have the t stat cover back on, and loaded with a new 170 degree t stat, valve covers back on and tourqued too (torqueing was definitely an adventure), had to (err...got to) buy a new torque wrench for the inch pounds, but i totally scored for black friday at sears. $30 down from $70!
Everything going back on with fresh stainless allens (courtesy of Justin)
[URL=http://s1219.photobucket.com/user/cdarnell1975/media/SRT10/20151129_121244_zpsdwikfplc.jpg.html][/URL]
After that i worked on cleaning up the hose and cable routing by the fan, and i should have the upper radiator hard pipe in soon.
Been a good day so far!
So far i have the t stat cover back on, and loaded with a new 170 degree t stat, valve covers back on and tourqued too (torqueing was definitely an adventure), had to (err...got to) buy a new torque wrench for the inch pounds, but i totally scored for black friday at sears. $30 down from $70!
Everything going back on with fresh stainless allens (courtesy of Justin)
[URL=http://s1219.photobucket.com/user/cdarnell1975/media/SRT10/20151129_121244_zpsdwikfplc.jpg.html][/URL]
After that i worked on cleaning up the hose and cable routing by the fan, and i should have the upper radiator hard pipe in soon.
Been a good day so far!
Last edited: