Search results

390/40/17 and custom steel wheels 3 passes. On ebay not sure how to link but if you email me I will send it to [email protected]

390/40/17 on custom made steel wheels over 1,300. invested 3 passes these are on ebay item#280886535363 they weigh 70# each 509-939-2120

On ebay 3 passes mounted on custom made steel wheels 12" wide fit truck really well

These are on Ebay if intrested. 3 passes 12" wide steel wheels

Going to down size to a R/C Its on Ebay right now. may not sell my reserve is $28k Dodge : Ram 1500 - eBay (item 280654739256 end time Apr-11-11 18:00:00 PDT)

Went to the track this weekend and thought I would do better but maybe its all she has. 1st run- 60ft 2.05/ 1/4 -13.33 103.4 mph 2nd run- 60ft 2.31 1/4- 13.00 104.2 mph 2005 Q/C Im equiped as follows: Paxton making 5 lbs boost Magnaflo catless mids M&H drag radials set at 18lbs DC...

I see that most have a picture when they post and would like to try it. Any help?

After playing last weekend with the Drag radials the truck is a mess. I was told by a regular drag racer to use WD-40 any ideas

Whats best does it work to engage it:dontknow:

I have never used these before and not liking how they bite. Getting ready to run next week so I bolted them on and did about 8 burn in's Heated them as M&H instructed me to 18 lb presure and burned them through 1st and a small amount in 2nd this was dark uniform rubber. I know im getting better...

Just looking at the tech for vehicles runing 13.99 and quicker it says driveline hoop required unless you on street tires then you can run 13.00 without it. So we have split drivelines do they require two? Getting ready to run in a couple weeks and dont want to be locked out from playing.

Just replaced my belt because it threw it. Was driving it very sane and it blew off. Belt had less than 500 miles. I checked everything very closely and found nothing that was out of the norm. When I put the new belt on I bought a new tensioning pulley as well as a new Paxton plastic idler...

My last post was in search of belt. Well Paxton dont know when they can get one they say they dont even know where they come from? Well get this Its a Vortech belt which Vortech owns Paxton or visa versa they dont even know.:dontknow: Any way I googled the part # Vortech 2A047110 which crosses...

Ok, thought i was prepared for this day when I installed the Paxton last year had an extra belt tools to install and it happened. Was driving normal went to turn and no power steering pulled over opened the hood to see the belt wadded up. Its tangled so bad I cut it off in pieces. It was wadded...

I was going to have steel wheels made up but they wanted $300.00 each. I have checked with several vendors for the Eagle 058 they cant seem to get them. Any help

Anybody ever had steel wheels made to mount M&H 390-40-17 street slicks to.

Big Ben canceled by a sponsor. Its about time someone got a back bone and hit these Pro jerks that think they are above the law in their pocket books. To bad our justice system cant figure it out.

After 6 times to the test facility the computer woke up and talked to their computer. I drove it all day Friday in town and on the highway stopping and turning it off several times. Looks all the mods on the truck didnt effect the emissions.

After reading old threads about testing and how to pass if your truck sits for extended period of time mine(garage queen) I took advice and drove it on the highway 30 minutes and in town another 15 when they plugged into the ecm they told me only one area had reported gave me my money back and...

First time to the sniffer. Just wondering if any tips on helping to pass. These are my mods: Paxton, 170 stat, rear cats removed, Magna flo tuned by DC perf. I was told by my exhaust guy that the rear cats were only used to reduce noise levels? I live in Wa. state.