Get guys. Looking for some stuff to give my truck a bit of extra flash
Viper badges
Srt grill badge
Stencil for the condenser
Billit parts
Hid lights for headlights and fogs
Led interior lights and tail bulbs
If anyone has a suggestion feel free to share ;)
Anything really...
Looking for a transmission :) someone must have one? I'm fine with one that needs a rebuild.
Also looking for pedals and hydraulics
Let me know what you have.
Thinking about bottle feeding my truck
Seen a plate on eBay for around $400 anyone use it? Nx I think makes it.
Or should I just go with dual nozzles mounted in the manifold?
Manifold is coming off anyway because I'm going to do the coils and wires and some powder coating
Anyone...
So I wanna lower the rear of my truck to make it sit level
Never any extra weight in the truck. And I can't do front and rear because I scrape my front bumper as it is now. Bad roads in my area.
Am I looking for a 2" or 1.5" or 3" anyone have any input and also I don't want to flip axle...
I need the passenger side rear rear part in black if possible :)
I would also buy a hitch cover if they make one so the big hitch is not sticking out... I guess I can just remove it lol
Hey guys. I just got a quick question
On my throttle body there is a left. A right. And what I'll call the back cable
My right side cable is loose wondering what it's for. Say about 1/2" play
Ok so I'm deleting all my cats and was wondering if anyone knows the stock pipe size so I can get a piece of pipe to replace the cats. Just cutting before and after the cat and replacing with straight pipe. If there is a size that will just slip over that would work too and would help the weld...
Issue 1) 48re Transmission is hunting/slipping 1-2-1-2 under low throttle pressure. If I stomp on it pulls hard and shifts firm. Also getting clunk from P-R and N-D also shifts firm. Works better when warm but still not right
Been searching high and low for a cure
New trans fluid and...
So I installed a new venter support bearing on my driveshaft and now it's having issues. Same as the reason I changed it.
It seems like the shaft is pushing toward the rear of the truck causing the bearing to push up the shaft and the metal bracket hits the big part of the shaft making bad...
When I split my shaft to change centre support bearing I forgot to mark it. Anyone know how it goes back together or will it only go back one way? I know it was stupid but live and learn
So I'm going to do a drop pan fluid swap. I'm very limited on parts in my area. What I could get my hands on today was a car quest trans filter and Quaker state aft+4 synthetic blend 6 quarts and I have easy access to cheap ATF+4 to finish top up if I should do that 6 was all they had in stock...
So my engine has a constant loud tick warm and cold.
Almost sounds like a knock very noticeable goes away with some throttle
Very noticeable standing next to truck even with hood closed
Doesn't sound like piston slap but could be possible I'm not familiar with these engine at all...
Hey guys wondering if someone can answer a few questions for me.
2005 quad cab 65000km
1st-2nd hard shift, can feel a jolt and rev increase while shifting
Should I adjust bands?
Transmission fluid change? Best fluid/filter to use. Cost is not a concern
Also gets a clunk from P...
Hey guys I'm new here just recently bought an SRT-10 and joined this forum :)
Here is my problem:
Power windows don't work
Blower motor don't work
Reverse lights don't work
Stereo works but no sound
Speedometer don't work
Abs light on
Park brake light on
Engine light code p0500...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.