Search results

I've got a set of QA1 shocks from a lowered RC. Rears are in excelent condition. Front shocks are in excelent working condition as well, however the post on the top of the shocks have been slightly broken durring the removal process. The nut will catch the threads and will allow the shock to be...

I just removed the lowering kit from my regular cab truck and am going back to the stock set up. I have a set of QA1 adjustable shocks that are in perfect working condition. The only flaw is with the front shocks, I ended up breaking the flat spot on the top post when I was taking them off...

I went to the local auto part store and ordered the complete set of Bilstein shocks for the truck. I keep second guessing them being it seems that anything for our truck is damn neer impossible to pick up from the local store. The shocks are in and the part numbers are BE5-2550-H1 and...

Driving home last night and the damn truck just died. It was like I just turned the key off. I coasted into the closest parking lot and popped the hood, I figured it was a wireing problem being that just before the truck died the check engine light went on and it started running real rich. This...

I was driving home this afternoon when I was at a light and smelled gas. I look in the rearview mirror and see excessive smoke belowing out, the I notice my A/F gauge is reading a steady 12.7-13.1 which is odd, being that it's usualy jumping all over the map at idle, and then the check engine...

I just got around to taking the lowering blocks off of my 04 rc. They are the X-metal blocks made from billit alluminum and are in fine condition. If anyone is looking for 3 inch lowering blocks let me know and I'll ship them to you for $100.

I have a used set of 2" lower coil springs off of my 04 RC. $80 and I'll take care of the shipping. If interested shoot me a PM.

Anyone looking for a Caddy? http://cm.ebay.com/cm/ck/1065-29296-2357-0?uid=49012440&site=0&ver=LCA080805&item=110281996718&lk=URL

Well it looks like I'm going to need to get a set of front calipers being that the front passenger side feels like staying engaged lately, which realy makes it hard to get off the line. I've done a number of searches and have had no luck finding a replacement. Do any of you know of a good...

My pasenger side front caliper locked up on me last night. It was'nt fully engaged, but it was enough to get the pads to smoke. I took the caliper off last night and one of the pistons was stuck. Has this happened to any of you, and if so how did you fix it?

So I'm cruisin around yesterday and I smell burning brake pad. It starts getting worse so I pull over to check it out and my passenger side caliper is smoking a little and there is a lot of heat comming from the rotor. I get back home, jack up the truck and try to spin the tire, still realy...

Let me take you back to how this whole thing started.... Back in March we picked up the Jeep SRT8 being that the wife and I are expecting a baby soon and needed to get a family mobile. Well about a month ago we ended up having to drive somewhere seprately. It just so happened that we ended up...

Finaly got the new exhaust gasket which fixed my problem, but I still have another problem I need to iron out before I hit the spray. I'm still running lean, even at idle the A/F is between 15-16.5. When I'm crusing it does'nt change much until I let off the gas and then it runs in the high 16's...

:mad: I don't f'n beleive it!! I change the spark plugs in my truck to the colder ones. After I get them changed, I take the truck for a spin to see if it affected the A/F at all. Well before I even get out of the sub, I feel that there is quite a hesitation. So I pull over pop the hood and...

I finaly got the AEM wideband in the truck and I'm getting a reading of 16-18 at idle, 14-16 at cruise and 13-14 when I get on it. What's the deal with it being so lean, is it normal with the B&G Stage II ECU? Whatever it is, I need to get this thing to run a little richer before I give er the...

Stupid question, but does the NX RPM window switch replace the WOT switch that the kit comes with?

Which one of you gurus could point me in the right direction? I need to tie my arming switch into a hot 12 VDC wire that is controlled by the ignition switch. Looking under the steering column, there is about a million wires to chose from, so which wires can I tap this SOB into?

Looking for a wideband A/F guage.

Kinda made an impulse buy over the weekend.... That'll happen. Anyway, I found a NX 100-300 HP dual nozzle kit with a 10lb bottle for under $700. Well, I've never delt with the N20 before so I am looking for a little advise or tips with the install and whatnot. Currently, I have forged...

Here are a set of Centric drilled and slotted FRONT rotors brand new in the box. I ordered them from Brake Planet WAAAAAY back in February and they just came in. Long story short. I ended up getting rotors from another source and need to get rid of these. Anyone interested send me a PM with a...